Hub Installation

The SmartThings instructions manual is provided for reference but is not needed for the setup.
Registering the Hub on the SmartThings platform in addition to the AirLocking platform is not supported.

The Hub is pre-configured and requires only minimal setup.

Install the batteries for power backup.

hub batteries

Plug in the the hub, and connect the network cable to the hub and to your router.

hub connected

The Hub will take some time to initialize. Once the initialization is done, the status light on the front will turn green.

hub green light

Other light colors and their meaning:

Blue (blinking)No Internet connection
Blue (solid)Attempting to connect
Magenta (blinking)Downloading firmware update
Magenta (solid)Applying firmware update
Red (blinking)Hub is having power issues

Contact Support